![background image](http://html.mh-extra.com/html/sealey/bc25635sr/bc25635sr_instructions_1224284003.webp)
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTANT:
no liability is accepted for incorrect use of this product.
WARRANTy:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
Web
Environmental Protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WEEE Regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic
equipment (Weee). When the product is no longer required, it must be disposed of in an environmentally protective way.
contact your local solid waste authority for recycling information.
Parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
5. TROuBLEShOOTING
Problem
causes
solutions
flat Battery vehicle will not turn over
i
nsufficient/bad booster cable clamp
connection
1. reconnect the booster cables as in
instructions.
2. check the battery terminals are
corrosion free if not clean and reconnect.
Booster cables connected incorrectly
check if the reverse polarity led is
illuminated (red) and an audible tone can
be heard. If so disconnect clamps and refit
as instructions.
Booster cable gets hot
incorrect booster cables being used
check the the vehicles battery AmP rating.
change the cables to the correct AmP type
if incorrect
the vehicles management system may not
be working correctly and may be stopping
the vehicle from starting. excessive
cranking of the engineer may cause cables
to get hot.
stop trying to jump start the vehicle and
consult automotive electrician.
Bc25635sr | issue 1 26/04/16
Original Language Version
© Jack sealey limited