background image

NOTE:

 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

W e b

email

Original Language Version

VS392    Issue: 1 -  27/09/13

  

Environmental Protection.

  

Recycle unwanted materials instead of disposing of  

   

them as waste. All tools, accessories and packaging  

   

should be sorted, taken to a recycle centre and 

   

disposed of in a manner which is compatible with the  

  

environment.

© Jack Sealey Limited

Item Description 

Part No.

  1  Puller Base Plate 

VS392.01

  2  Telescopic Puller 

VS392.02

  3  Puller Handle 

VS392.03

  4  Piston Clamp 

VS392.04

  5  Piston Clamp Bolt 34mm x2  VS392.05

  6  Piston Clamp Bolt 59mm x2  VS392.06

  7  'T' Handle Hex Key 6mm 

VS392.07

  3.  PARTS LIST

 

3.1. 

Position the Piston Clamp (item 4) over the piston 

 

shaft so it rests on the shock absorber main body 

 (

DO NOT

 tighten the Piston Clamp hex bolts).

3.2. 

Screw Puller Base Plate (item 1) and Puller Handle

 

(item 3) onto Telescopic Puller (item 2) and position 

 

over shock absorber piston shaft so it rests on the 

 

Piston Clamp previously fitted.

3.3. 

Fit original shock absorber nut onto piston thread 

 

(hand tight only).

3.4. 

Rotate Puller (item 3) handle clockwise to extend 

 

shock absorber piston.

3.5. 

Once piston shaft is fully extended, tighten hex bolts

 

with the 6mm Hex Key supplied to clamp 

 

the piston shaft in the extended position.

3.6. 

Remove Puller assembly (items 1, 2, 3) and

 

 assemble road spring and upper mounting as 

 

per the manufacturer's instructions.

3.7. 

Once strut is assembled remove the piston clamp

 

(item 4).

  3.   OPERATION

Reviews: