Line Pull And Capacity Per Layer
Line Pull And Capacity Per Layer
layer of Cable
1
2
3
4
5
layer of Cable
1
2
3
4
Rated
line Pull
lb
2500
2033
1713
1480
1303
Rated line Pull
lb
4500
3691
3129
2715
Kg
1135
922
777
671
591
Kg
2043
1676
1421
1233
Cable
Capacity
Ft
7.9
17.4
28.2
40.7
45.9
Cable Capacity
Ft
11.5
25.6
42.6
55.8
M
2.4
5.3
8.6
12.4
14
M
3.5
7.8
12.9
17
5. INSTALLATION
5.1.
WINCH INSTALLATION
5.1.1.
Mount the winch on the vehicle or other fixed installation by using M8 x1.25 x 30mm screws, M8 nuts, Ø8mm flat and spring washers.
WARNING!
Mount the winch so that the wire rope underwinds. Improper mounting could damage your winch and void your warranty.
See fig.4.
5.2.
ELECTRICAL INSTALLATION (REfER TO fIG.5)
WARNING!
These winches work on standard automotive 12V dC only, never connect to a 230V mains, as solenoid burnout or fatal
shock may occur.
NOTE:
Make sure the battery is disconnected.
5.2.1.
Plug the switch plug into the switch socket. Plug the green wire into the green wire on the relay block and the black wire into its connector
on the relay block.
5.2.2.
Connect the red wire to the red marked terminal on the relay block and to the positive (+) terminal of the battery. Connect the black wire to
the negative (-) terminal of the battery.
fig.4
fig.5
ATV1135.V2, ATV2040.V2 Issue 2 (HF) 01/03/19
Original Language Version
© Jack Sealey limited