NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
3.1.
Remove strut from vehicle according to procedures recommended in the manufacturer’s manual
3.1.1. Put the jaws into position and engage them on the spring as far apart as possible
3.1.2.
Put the AK3843 body into position as shown in fig.1, (A =MacPherson strut), tighten the lower jaws around
the lowest part of the spring using the locking ring (fig.1B).
3.1.3.
Ensure that the jaws are correctly aligned, making sure the two arms are parallel to each other, see fig.2.
3.1.4.
Tighten compressor by turning the two 19mm hex adjuster bolts (fig.1D) clockwise using a suitable
wrench. The coil will need to be compressed equally on each side - alternate between each arm so as
to not unbalance the spring. Compress the spring without allowing it to become coil bound.
3.1.5.
When spring is fully compressed and is free to rotate on the strut remove top plate from strut, then
withdraw the spring.
3.1.6.
Reverse above procedure to replace spring.
3. INSTRUCTIONS FOR USE
fig.2
4.1.
Before each use check the compressor to ensure it is not damaged or worn. If suspect do not use
the unit, but contact your local Sealey Dealer who will be able to advise you regarding repair kits and
spare parts.
4.2.
Keep the compressor spindles lubricated.
4.3.
Keep the compressor clean, and when not in use store in a safe, dry, childproof location.
4. MAINTAINING THE COMPRESSOR
fig.1
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
AK3843 - 1 - 150807
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or phone 01284 757500.
