©Sealevel Systems, Inc.
R4 Manual
31
SL9260 06/2015
Installing SeaRAQ Modules
IMPORTANT NOTE:
The computer system must be shut down
before
any I/O expansion cards are inserted or removed.
Ensure the front Power LED is OFF before adding or removing any I/O cards.
Installing SeaRAQ modules is a simple matter of selecting a slot on the rear of the unit then removing the
blank plate of the slot that you want to insert the module. Slide the card down the card guide and then seat
into the connector in the rear of the slot, then tighten the thumbscrews into the chassis.
1. Loosen screws to the blank plate to remove it.
2. Slide card down guide rails into socket.
3. Tighten screws on left and right of bracket to securely mount the card.
