background image

 

Warranty 

Sealevel Systems 

ACB-MP.PCI

 

Page 

14

 

Warranty 

Sealevel Systems, Inc. provides a lifetime warranty for this product. Should this product fail to be in good working 
order at any time during this period, Sealevel Systems will, at it's option, replace or repair it at no additional charge 
except as set forth in the following terms. This warranty does not apply to products damaged by misuse, 
modifications, accident or disaster. 
 
Sealevel Systems assumes no liability for any damages, lost profits, lost savings or any other incidental or 
consequential damage resulting from the use, misuse of, or inability to use this product. Sealevel Systems will not 
be liable for any claim made by any other related party. 

 
RETURN AUTHORIZATION MUST BE OBTAINED FROM SEALEVEL SYSTEMS BEFORE RETURNED 
MERCHANDISE WILL BE ACCEPTED.  AUTHORIZATION CAN BE OBTAINED BY CALLING SEALEVEL 
SYSTEMS AND REQUESTING A RETURN MERCHANDISE AUTHORIZATION (RMA) NUMBER. 

 

Sealevel Systems, Incorporated  
155 Technology Place 
P.O. Box 830 
Liberty, SC 29657 USA 
(864) 843-4343 

FAX: (864) 843-3067 

www.sealevel.com

 

email: [email protected] 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Technical Support is available from 8 a.m. to 5 p.m. Eastern time.  

Monday - Friday 

 

Trademarks 

Sealevel Systems, Incorporated acknowledges that all trademarks referenced in this manual are the service mark, 
trademark, or registered trademark of the respective company. 
 

ACB-MP.PCI

 

is a trademark of Sealevel Systems, Incorporated. 

 

Summary of Contents for ACB-MP.PCI

















Reviews: