13
© Sealevel Systems, Inc. 3603 Manual | SL9111 7/2021
SSEnable
SSEnable is a PCMCIA DOS only utility that will allow the use of your PC Card without loading card and
socket services. The utility is available for applications that conflict with card and socket services. Please
note that this utility does NOT use card and socket services and greatly reduces the features of the PCMCIA
card. SSEnable is available upon your request. If you have any questions concerning the software for the
ULTRA-PC-SIO-485
please contact Sealevel System Technical support. Refer to
information.
One very important thing to remember about SSEnable is that it does not provide ‘Hot Swapping’
capability for the PCMCIA socket. Hot insertion or removal of the PC Card while using SSEnable
could cause damage to the PCMCIA socket or the card.
The command line parameters for the program are listed by typing SSEnable at the DOS prompt. The
following are example command line entries for the SSEnable program:
Enable base I/O address 238 hex,-IRQ 5, -memory range d000-dfff, (which has been excluded from any
memory manager and is reserved for the PC Card attribute memory) and the PC Card is in socket 1
SSEnable /b:238 /i:5 /m:d000 /s:1
To remove the configuration on socket 1 type:
SSEnable /s:1 /r
SSEnable will only work with Intel PCIC compatible socket controllers
