12
3. Unscrew the heaters from the bottom sealing jaw in order to remove the thermostat sensor from
the sealing jaw. Note: In order to fully remove and install the thermostat, one may also need to
separate the head of the sealer from the base.
Figure 10.
Unplug two connections from thermostat base found
inside sealer head
Figure 11.
Unscrew heaters from bottom sealing jaw
Replacing Timer
1. Unscrew the two screws found on the timer. Remove the timer from the base of the sealer.
2. Unplug the timer and replace with new timer.
Figure 12.
Remove the old timer
Figure 13.
Replace with new timer.
