SealerSales FRM-1120 Series, Manual

Page: 20 / 29

19
Code Name Quantity Remark
17-1 bottom board 1
17-2 ink roller shaft 1
17-3 swing pole of ink roller 1
17-4 heating block of ink roller 1
17-5 heating pipe 110v/40w 1
17-6 printing wheel shaft 1
17-7 spring of holding latch on printing wheel 1
17-8 cover for printing wheel shaft 1
17-9 printing wheel 1
17-10 printing wheel cover 1
17-11 holding latch for printing wheel 1
17-12
printing-silicone wheel shaft
1
17-13 silicone ring 1
17-14 circlip for hole 1 GB/T893.1-1986
17-15 core of silicone wheel 1
17-16 bearing 1 GB/T276-1994
17-17 eccentric sleeve 1
17-18 upper cooling block shaft 1
17-19 upper cooling block 2
17-20 flat washer 7 GB/97.1-2002
17-21 cap nut 7 GB/923-1988
17-22 lower cooling block shaft 1
17-23 lower cooling block 1
17-24 upper heating block shaft 2
17-25 upper heating block 1
17-26 lower heating block shaft 2
17-27 lower heating block 1
17-28 feed opening 1
17-29 wind catcher 1
17-30 fan 1
17-31 support for brush 1
17-32 carbon brush holder 1
17-33 pressing plate of brush 2
17-34 groove sensor 1
17-35 electromagnetic clutch assembly 1
17-36 middle pulley 1
17-37 middle pulley shaft 1
17-38 ink roller shaft pulley 1
17-39 seat for ink roller swing pole shaft 1