![background image](http://html1.mh-extra.com/html/sealersales/frm-1120-series/frm-1120-series_manual_1223748013.webp)
12
the silicone wheel, and they only touch each other when the printing work is in process.
Loosen the screw (4) in the front of the silicone wheel, then rotate the eccentric sleeve
(3), so as to make the type
s’ surface slightly touch the silicone wheel’s (2)surface. If the
machine is used to print relatively thicker packing bag, the screw should be loosened
accordingly as the pressure can’t be too much, fasten the screw (4)after making
adjustment.(see diagram 14)
1. printing wheel 2.silicone wheel 3. eccentric sleeve 4.screw
Diagram 14
12). Temperature adjustment for printing wheel and ink roller:
All the knobs of this machine are set to 0 position before leaving factory. Users need to
make adjustment by themselves. For a new ink roller, during previous time of use, the
temperature should be relatively lower, after a period time of use, the temperature can be
raised to higher degree, which can make the deep-seated ink ooze and prolong the ink
roller’s life-span. When the ink roller reaches the working temperature, use a piece of
white paper to touch ink surface, as long as it can stick a little ink, it should be ok. The
temperature can’t be too high or too low.
The ink roller that suits for this machine specified in following table, including colors of
white, yellow, red, blue, green, brown and black. If the packing bag needs steam cooking
after printing
,
you should choose the ink rollers of moderate temperature or high
temperature, in this situation, the temperature must be set in higher degree accordingly
while using.
Model
Outer dia.
(
mm
)
Height
(
mm
)
Low temperature series
120-150
℃
(
NO:935
)
Φ36
16
Φ36
32
Φ36
40
Moderate temperature series
135-165
℃
(
NO:932
)
Φ36
16
Φ36
32
Φ36
40
High temperature series
150-175
℃
(
NO:930
)
Φ36
16
Φ36
32
Φ36
40
Summary of Contents for FRM-1120 Series
