14
*** SETTING & USING THE CHANNEL MEMORY con’t***
Using The Stand-By Mode
Use the Stand-By mode during long periods
between encapsulation jobs to significantly
reduce energy costs!
1. Press button once to enter the
Stand By Mode. The word stand by will
display on the screen.
ST/BY
2. The temperature will go to 180°f/80°c
and remain at this temperature until
Stand By button is pressed again.
NOTE: The machine will not "run" while in the
Stand By Mode.
Please press the
button to return to the previous working
condition.
ST/BY
Using Fans
1. Press the button to turn fan on or off.
FAN
FAN
Auto Shut Down
1. The EP42 comes equipped with an auto shut
down mode designed to shut the machine down,
should you forget to. If this occurs you will see
PpOF appear in the display.
2. Cycle the main power switch off and on again to return
to normal operation.
Reverse
1. Press and hold the button to reverse
direction of the machine.
REV
Run
1. Press the button to start the rollers,
to stop.
STOP
RUN