10
**For more detailed instructions, visit www.SeairaGlobal.com**
WARNING: Always unplug the unit before doing any maintenance.
Cleaning the Filter
1. Unplug the unit.
2. For PreFilter:
a. Remove prefilter from inlet of machine.
b. Vacuum or wash with warm water (no soap).
3. For MERV-10/HEPA/Carbon Filters:
a. Replace as necessary- we recommend checking the filter
at least 1x/year
Electrical Access
• Unscrew the 9 screws on the side board.
• Remove the 2 screws on the
control board cover.
• Mix a 16 ounce solution of bleach (1 oz 15 oz water) OR
vinegar (4 oz white v 12 oz water).
• Remove filter(s) so you have access to the drain tray.
• Disconnect power to dehumidifier.
• Pour the cleaning solution into the drain tray at the base of the coils.
If any cleaning solution gets on the coils, flush with water.
• Allow solution to soak for 15 minutes.
• Pour in 16-32 ounces of clean water to flush out the drain line.
Cleaning the Gravity Drain
Complete about once per year, depending on environment
Summary of Contents for WatchDog NXT85
Page 13: ...12 Troubleshooting ...
Page 14: ...13 Spare Parts ...
