TECHNICAL INFORMATION
Fail-Safe Protection
The EX-2 has built-in Failsafe protection. If the drone loses transmitter signal or the battery voltage
drops to a certain level (22v), the drone will attempt to return home and land. The Failsafe will only
work if the drone is flying in one of the GPS modes as it will need to use the GPS to find its way
home.
If you notice the drone returning home before you have released the line, immediately release the
line. This will reduce the load and the current draw on the battery and will give the drone a better
chance to fly home.
Maintenance
The EX-2 is easy to look after and there is minimal maintenance needed, But the beach and marine
environment are harsh on equipment.
•
Treat your battery and EX-2 connectors with Corrosion X
•
Do not leave your EX-2 in direct sunlight or a hot car for extended periods.
•
Wipe any salt spray or moisture after using near the sea. Remove any sand after using near
the beach.
•
Test the battery connections for every flight. The fit should be tight and firm. If loose,
replace the connectors as soon as possible.
If you have a hard landing, the plastic rivets that hold the body together could come loose. If you
have any loose rivets, pull it out, separate the barrel and the shaft. Align the holes of the outer and
inner skins. Insert the barrel into the hole through both skins, followed by pushing the shaft into
the barrel and locking everything back into place.
Saltwater Exposure
Saltwater is corrosive and it can do a lot of damage to your drone if left. While the EX-2 is
waterproof, if left, the saltwater will ultimately damage the wiring and the motors. Water or salt
moisture damage is not covered by warranty. Onshore winds will carry a lot of moisture and salt
inshore. If you need to clean your sunglasses or your windshield of your car, you will need to clean
your drone.
Drone received a mild water splash and no water in the frame
As the EX-2 is waterproof, you can give it a good wash with warm
soapy water or with a product such as SaltAway.
•
Wash the outside of the drone with a salt removal product
like SaltAway or warm soapy water. It is OK to use car washing
liquid, but not dishwashing liquid as that has salt in it.
•
Rinse.
•
Dry off with a cloth.
Page 29
Summary of Contents for EX-2 Pro
Page 10: ...Page 10...
Page 36: ...Page 36...
