T-34 MENTOR
Instruction Manual.
30
1) If all the decals are precut and ready to
stick. Please be certain the model is clean
and free from oily fingerprints and dust.
Position decal on the model where de-
sired, using the photos on the box and aid
in their location.
APPLY THE DECALS.
2) If all the decals are not precut, please
use scissors or a sharp hobby knife to cut
the decals from the sheet. Please be cer-
tain the model is clean and free from oily
fingerprints and dust. Position decal on
the model where desired, using the pho-
tos on the box and aid in their location.
INSTALLING BATTERY - RECEIVER.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery
pack lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
Note : If you choose to make the wing
lights operational, you will need to install
a 1.5 Volt power source, install an addi-
tional switch, and complete the wiring.
We suggest using a Y-harness and servo
connectors to complete the wiring, so the
wiring can be disconnected for wing re-
moval.
Receiver.
Battery.
Battery 1.5v connect
with light.
ATTACHMENT WING- FUSELAGE.
Insert two wing panels as pictures below.
Slide the aluminum tube into fuselage.
Wing tube.
Insert canopy hatch on fuselage as pic-
tures below.
Wing bolt.
