P47 SNAFU
Instruction Manual.
8
INSTALLING THE SWITCH RECEIVER.
Install the switch into the precut hole in
the side, in the fuselage.
3/32” Hole.
Trim and cut.
.
Switch.
INSTALLING THE SWITCH ENGINE.
Trim and cut.
Switch.
INSTALLING THE STOPPER
ASSEMBLY.
1) Using a modeling knife, carefully cut
off the rear portion of one of the 3 nylon
tubes leaving 1/2” protruding from the
rear of the stopper. This will be the fuel
pick up tube.
2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of
the line to the weighted fuel pick up and
the other end to the nylon pick up tube.
A
B
Summary of Contents for P47 SNAFU
Page 12: ...P47 SNAFU Instruction Manual 12 12 Drill hole 3mm Drill hole Knife Cut C A glue ...
Page 25: ...WWW SEAGULLMODELS COM 25 M3x10mm M3 lock nut M3 clevis 30mm ...
Page 26: ...P47 SNAFU Instruction Manual 26 Cut Cut Insert bomb onto the wings Epoxy Epoxy ...
Page 37: ...WWW SEAGULLMODELS COM 37 37 ...
