Seagull Models P-26A PEASHOOTER, Assembly Manual

Page: 15 / 38

15
.
Trim and cut.
3/32” Hole.
INSTALLING THE STOPPER
ASSEMBLY.
1) Using a modeling knife, carefully cut
off the rear portion of one of the 3 nylon
tubes leaving 1/2” protruding from the
rear of the stopper. This will be the fuel
pick up tube.
2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of
the line to the weighted fuel pick up and
the other end to the nylon pick up tube.
.
Switch.
INSTALLING THE ENGINE SWITCH.
Trim and cut.
Switch.
Vent tube.
Fuel fill tube.
Fuel pick up tube.
3) Carefully bend the second tube up at a 45º
angle. This tube is the vent tube.