Seagull Models GIANT SCALE P-47 RAZORBACK 50-61cc/EP ARF, Assembly Manual

Page: 7 / 58

7
Use a pin vise and 3/32-inch (2mm) drill
bit to clear the paint from the lap control
horn.
5 .
7 .
6 .
Route the servo lead for the lap servo out
at the root of the wing. Connect the lap
servo to the radio system. With the radio
system on, place the lap servo into posi-
tion.
Attach the clevis to the lap servo arm.
8 .
Adjust the linkage so the lap is in the
mid-lap position. It may take a few tries
to properly adjust the linkage.
9 .
Once adjusted, make sure all clevis re-
tainers are in position. Apply a drop of
threadlock near the clevis, then tighten
the nut against the clevis to keep the link-
age from changing length inside the wing.
10 .
3x10mm.