Seagull Models FOCKE-WULF FW190, Assembly Manual

Page: 7 / 37

7
Secure the servo to the aileron hatch
using Phillips screwdriver and the screws
provided with the servo.
Apply 1-2 drops of thin C/A to each of
the mounting tabs. Allow the C/A to cure
without using accelerator.
Remove the string from the wing at the
servo location and use the tape to attach it
to the servo extension lead. Pull the lead
through the wing and remove the string.
C/A glue
7 .
8 .
9 .
10 .
Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
11 .
12 .
3x10mm
13 .