10
Momentus 4200.3 PATA Product Manual, Rev. B
2.7
Seek time
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using
drive diagnostics. The specifications below are defined as follows:
• Track-to-track seek time is an average of all possible single-track seeks in both directions.
• Average seek time is a true statistical random average of at least 5,000 measurements of seeks between
random tracks, less overhead.
*Measured in performance mode
Note.
These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet or exceed the
noted values. However, due to the manner in which these drives are formatted, benchmark tests that
include command overhead or measure logical seeks may produce results that vary from these speci-
fications.
2.8
Time to ready
Typical seek times (msec)*
Read
Write
Track-to-track
1.0
1.5
Average
11.0
13.0
Full-stroke
22.0
24.0
Average latency
5.56
5.56
Time to ready
Typical
Max @ 25
°
C
Power-on to Ready (sec)
3.0
8.0
Standby to Ready (sec)
3.0
8.0
Summary of Contents for ST9408116A
