Seagate ST64022CF Product Manual Download Page 27 | Manualshive

Page: 27 / 66

background image

ST1.2 Series Product Manual, Rev. B

21

3.0

Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1

Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis-
charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

• Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s

exposure to ESD.

• Before handling the FX interface model drives (ST68022FX, ST66022FX and ST64022FX), put on a grounded

wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a
grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

• Handle the drive only by its edges or frame.

Figure 8.

ST1.2 Series proper handling example

• The drive is fragile—handle it with care. Do not press down on the drive top cover or attempt to use a pen to

write on the drive’s label.

• Do not apply more than 1.5 kg of force to the top cover.

Figure 9.

ST1.2 Series improper handling example

• Always rest the FX interface model drives (ST68022FX, ST66022FX and ST64022FX) on a padded, antistatic

surface until you mount it in the system.

«
...
25
26
27
28
29
...
»

Summary of Contents for ST64022CF



































































Reviews:

No comments

Related manuals for ST64022CF

Brand: Backyard Products Pages: 72

Brand: LaCie Pages: 27

Brand: B&B Electronics Pages: 2

Brand: LaCie Pages: 27

H-Post Shelving

Brand: Hallowell Pages: 7

Brand: ST Pages: 9

Brand: Transcend Pages: 25

TotalStorage NAS 100

Brand: IBM Pages: 18

Brand: SonicWALL Pages: 56

Brand: Argus Pages: 24

Brand: HP Pages: 58

Brand: HANBiT Electronics Pages: 23

Brand: Okofen Pages: 48

Brand: SaniBin Pages: 8

Brand: Adaptec Pages: 2

RAIDstation RS/7U160 KIT

Brand: Adaptec Pages: 51

RAIDStation RS/7F

Brand: Adaptec Pages: 53

Brand: Atech Flash Technology Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands