background image

Seagate SkyHawk SATA Product Manual, Rev. E

  5

  

1.0

Introduction

This manual describes the functional, mechanical and interface specifications for the following:

 

Seagate® SkyHawk™ Serial ATA model drives:.

These drives provide the following key features:
• 1M hour MTBF - designed for high write duty cycle across SkyHawk
• 256 MB data buffer
• 7200 RPM spindle speed
• ATA AV Command support - streaming video command support across SkyHawk
• Best-in-class acoustic performance means virtually silent operation
• Built-in error recovery for non-stop video streaming
• Compliant with RoHS requirements in China and Europe
• Full-track multiple-sector transfer capability without local processor intervention
• High instantaneous (burst) data-transfer rates (up to 600MB per second)
• Low activity power
• Native Command Queuing with command ordering to increase performance in demanding applications
• Performance-tuned for seamless video applications
• PowerChoice™ for selectable power savings
• Reliability for 24×7 video surveillance applications
• Rotational Vibration - mitigation of system level rotational vibration inside SkyHawk
• SeaTools® diagnostic software performs a drive self-test that eliminates unnecessary drive returns
• State-of-the-art cache and on-the-fly error-correction algorithms
• Streaming video optimization - consistent command completion times & ERC support across SkyHawk
• Support for S.M.A.R.T. drive monitoring and reporting
• Supports "8+" drive bays
• Supports ATA8 streaming commands
• Supports latching SATA cables and connectors
• Supports up to 64 cameras
• TGMR recording technology provides the drives with increased areal density
• Thermal monitoring and reporting for 24×7 operations
• Top Cover Attached motor for excellent vibration tolerance
• Transient power on management - <=1.8A spin-up current
• Uncompromising reliability supports flexible surveillance design with case temperatures up to 70ºC
• Workload ratings of 180TB/year
• Worldwide Name (WWN) capability uniquely identifies the drive

Standard 512E models

ST10000VX0004

Note

Seagate recommends validating the configuration with the selected HBA/RAID 
controller manufacturer to ensure use of full capacity is supported.

Поставщик систем безопасности TELECAMERA.RU

Summary of Contents for SKYHAWK ST10000VX0004


































Reviews: