12
Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B
1.8.4 Altitude
1.8.5 Shock
All shock specifications assume that the drive is mounted securely with
the input shock applied at the drive mounting screws. Shock may be
applied in the X, Y or Z axis.
1.8.5.1 Operating shock
These drives comply with the performance levels specified in this docu-
ment when subjected to a maximum operating shock of 15.0 Gs (based
on half-sine shock pulses of 11 msec). Shocks are not to be repeated
more than two times per second.
1.8.5.2 Nonoperating shock
The nonoperating shock level that the drive can experience without
incurring physical damage or degradation in performance when subse-
quently put into operation is 75 Gs (based on nonrepetitive half-sine
shock pulses of 11 msec duration) or 200 Gs (based on nonrepetitive
half-sine shock pulses of 2 msec duration). Shock pulses are defined by
MIL-STD-202F).
1.8.6 Vibration
All vibration specifications assume that the drive is mounted securely
with the input vibration applied at the drive mounting screws. Vibration
may be applied in the X, Y or Z axis.
1.8.6.1 Operating vibration
The following table lists the maximum vibration levels that the drive may
experience while meeting the performance standards specified in this
document.
Operating
–122 m to 3,048 m (–400 ft to 10,000+ ft)
Nonoperating
–122 m to 12,192 m (–400 ft to 40,000+ ft)
5–22 Hz
0.02-inch displacement (peak to peak)
22–350 Hz
0.50 Gs acceleration (zero to peak)
