background image

Medalist 13640, 10230, 6422 and 3210 Product Manual, Rev. B

iii

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

Specification summary table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

1.0  Drive specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

1.1  Formatted capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

1.1.1  Default logical geometry  . . . . . . . . . . . . . . . . . . . . . . . . .  5

1.1.2  Supported CHS translation geometries   . . . . . . . . . . . . .  6

1.2  Physical organization  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

1.3  Recording and interface technology  . . . . . . . . . . . . . . . . . . . .  6

1.4  Physical characteristics   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

1.5  Seek time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

1.6  Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

1.7  Power specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

1.7.1  Power consumption   . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

1.7.2  Conducted noise  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

1.7.3  Voltage tolerance   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

1.7.4  Power-management modes   . . . . . . . . . . . . . . . . . . . . .  10

1.8  Environmental tolerances  . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

1.8.1  Ambient temperature   . . . . . . . . . . . . . . . . . . . . . . . . . .  11

1.8.2  Temperature gradient  . . . . . . . . . . . . . . . . . . . . . . . . . .  11

1.8.3  Humidity   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

1.8.4  Altitude   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

1.8.5  Shock   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

1.8.6  Vibration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

1.9  Drive acoustics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

1.10  Electromagnetic susceptibility . . . . . . . . . . . . . . . . . . . . . . .  13

1.11  Reliability   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

1.12  Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

1.12.1  Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

Summary of Contents for Medalist 10230









































Reviews: