Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. C
6
*
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels
.
†
Seagate does not recommend operating at sustained case temperatures above 60°C.
Operating at higher temperatures will reduce useful life of the product.
2.2
Formatted capacity
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of
guaranteed sectors as defined above
.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support
of drives with capacities over 137GB.
Vibration, operating
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
Operation Rotational vibration
20–1500Hz: 12.5 rads/s²
Vibration, non-operating (Random psd)
2–500 Hz:
2Hz/.001g2/Hz
4Hz/.03g2/Hz
100Hz/.03g2/Hz
500Hz/.001g2/Hz
Drive acoustics, sound power (bels)
Idle**
2.8 (typical)
3.0 (max)
2.2 (typical)
2.4 (max)
Performance seek
3.2 (typical)
3.4 (max)
2.6 (typical)
2.8 (max)
Non-recoverable read errors
1 sector per 10
15
bits read
Annualized Failure Rate (AFR)
<1% based on 8760 POH
Maximum Rated Workload
Maximum rate of 300TB/year.
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reli-
ability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on hours.
Workload Rate = TB transferred * (8760 / recorded power on hours).
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web
page:
http://www.seagate.com/support/warranty-and-replacements/
.
From this page, click on the “Is my Drive under Warranty” link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.The
system will display the warranty information for the drive.
Load-unload cycles
600,000
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
Yes
ST models
Formatted capacity*
Guaranteed sectors
Bytes per logical sector
ST8000NE0021
8TB
15,628,053,168
512
ST6000NE0021
6TB
11,721,045,168
ST4000NE0025
4TB
7,814,037,168
ST2000NE0025
2TB
3,907,029,168
Drive specification
ST8000NE0021
ST6000NE0021
ST4000NE0025
ST2000NE0025
