Seagate Elite 9, Product Manual

Page: 79 / 82

Elite 9 Product Manual, Rev. C 69
reformatting 9
relative humidity 29
reliability
general 8
service, and 20
specifications 19
REQ/ACK offset 52
rotation speed 11
rotational
latency, average 11
offset 18
position locking 17
skew, operating the drive with 18
S
safety agencies, certification 3
safety/regulatory agency compliance 3
SCSI
bus conditions and misc. features 51
bus transfers 7
timing 65
SCSI interface
cable connector requirements 55
commands supported 46
electrical description
differential drivers/receivers 55
single-ended drivers/receivers 55
messages supported by the 45
physical connections 53
terminator requirements 58
transfer rate 13
SCSI physical interface 53
non-wide 59
wide 62
sector
size, allowable range 13
sector reallocation 7
seek
error rate 19
errors, defined 20
times, listed 12
seek errors 20
self-configuring host software 5
service
life 19, 23
philosophy 23
tools 23
servo heads 11
shielded SCSI I/O cable 9
shock 29, 30
single-ended drivers/receivers 56
single-ended I/O cable requirements 54
single-unit shipping pack 8
spare reallocation 8
spindle
brake 7
enabling and disabling 18
stopping with the Motor Start command 13
synchronization mode 18
spindle sync cable connector 41
SSREF+ 17
start current 25, 26
start/stop time 13
surface, number of bytes per 11
synchronized
drive interconnect diagram 16
reference signal 17
spindle operation 15
spindles interface 42
synchronous data transfer 52
T
temperature
measurement locations 22
operating and non-operating 29
terminating
differential drivers and receivers 57
drives 9, 54, 56
SCSI devices 54
terminator
option jumper connectors 41
power 41, 59
requirements 58
track, number of bytes per 11
tracks, number of 11
tracks per inch, number of 11
U
UL 3
unformatted capacities 8
unit attention 18
unrecoverable
error, defined 19
write errors, defined 19