38
Elite 47 Product Manual, Rev. A
9.3
SCSI interface commands supported
Table 5 lists the SCSI interface commands that are supported in the SCSI-2 and SCSI-3 modes of the drive.
OEM standard drives are shipped set to operate in SCSI-2/SCSI-3 mode. Elite family drives can be changed
back and forth between SCSI-1, SCSI-2, and SCSI-3 modes using the Change Definition command.
Table 5:
Commands supported by Elite 47 family drive
Command Name
Command
Code [5]
Supported by
SCSI-2/3
Change definition
40h
Y
Compare
39h
N
Copy
18h
N
Copy and verify
3Ah
N
Format unit [1]
04h
Y
Block format
N
Bytes from index
Y
Physical sector format
Y
DPRY bit supported
Y
DCRT bit supported
Y
STPF bit supported
Y
IP bit supported
Y
DSP bit supported
Y
IMMED bit supported
Y
VS
N
Inquiry
12h
Y
Date code page (C1h)
Y
Firmware numbers page (C0h)
Y
Implemented operating definitions page (81h)
Y
Jumper settings page (C2h)
Y
Supported vital product data pages (0h)
Y
Unit serial number page (80h)
Y
Lock-unlock cache
36h
N
Log select
4Ch
Y
PCR bit
Y
DU bit
N
DS bit
Y
TSD bit
Y
ETC bit
N
TMC bit
N
LP bit
N
Log sense
4Dh
Y
Cache statistics page (37h)
Y
Non-medium error page (06h)
Y
Pages supported list (00h)
Y
Power-on time page (3Eh)
Y
Read error counter page (03h)
Y
S.M.A.R.T. status log page (2Fh)
N
S.M.A.R.T. attitude log page (30h)
N
Verify error counter page (05h)
Y
Write error counter page (02h)
Y
