Seagate Cheetah X15 Product Manual Download | Manualshive

Page: 81 / 92

background image

Cheetah X15 Product Manual, Rev. C

71

10.0

Seagate Technology support services

Online Services

Internet

www.seagate.com for information about Seagate products and services. Worldwide support is available 24
hours daily by e-mail for your disc or tape questions.

Presales Support:
Disc: http://www.seagate.com/support/email/email_presales.html or [email protected].
Tape: http://www.seagate.com/support/email/email_tape_presales.html or
[email protected].

Technical Support:
Disc: http://www.seagate.com/support/email/email_disc_support.html  or  [email protected].
Tape: http://www.seagate.com/support/email/email_tape_support.html  or  [email protected].
Server Appliance: http://www.seagate.com/support/email/email_nas_support.html  or
[email protected].

Reseller Marketplace
Reseller Marketplace is the storage industry’s first collaborative, e-commerce marketplace offering resellers
the fastest, most efficient online purchasing process for Seagate storage solutions. The Reseller Marketplace
at http://marketplace.seagate.com, an exclusive service for US resellers participating in the Seagate Partner
Program (SPP), is designed to streamline the purchasing process of Seagate solutions and provide unprece-
dented value to Seagate’s resellers through real-time pricing and availability, fast and easy comparison shop-
ping, and seamless integration with key distributors for a one-stop shopping experience.

For support, questions and comments: http://reseller.seagate.com/benefits/T1.html or 1-877-271-3285 (toll-
free) 9

A

.

M

. to 7

P

.

M

. (eastern time) Monday through Friday.

SeaBOARD

®

is a computer bulletin board system that contains information about Seagate disc and tape drive

products and is available 24 hours daily. Set your communications software to eight data bits, no parity and one
stop bit (8-N-1).

Automated Services

SeaFONE

®

(1-800-SEAGATE) is Seagate’s toll-free number (1-800-732-4283) to access our automated self-

help services. Using a touch-tone phone, you can find answers to service phone numbers, commonly asked
questions, troubleshooting tips and specifications for disc drives and tape drives 24 hours daily. International
callers can reach this service by d1-405-936-1234.

SeaFAX

®

is Seagate’s automated FAX delivery system. Using a touch-tone phone, you can obtain technical

support information by return FAX 24 hours daily. This service is available worldwide.

Presales Support

Presales Support

Our Presales Support staff can help you determine which Seagate products are best suited for your specific
application or computer system.

Disc: 1-877-271-3285; Tape: 1-800-626-6637; Server Appliance: 1-800-732-4283.

Online Tape Purchases

US customers can purchase Seagate data cartridges, tape supplies, accessories, and select Seagate tape
drive products 24 hours daily at http://buytape.seagate.com.

«
...
79
80
81
82
83
...
»

Summary of Contents for Cheetah X15





























































































Reviews:

No comments

Related manuals for Cheetah X15

Rugged Triple USB 3.0

Brand: LaCie Pages: 2

Rugged Triple USB 3.0

Brand: LaCie Pages: 2

Brand: LaCie Pages: 5

RUGGED BOSS SSD

Brand: LaCie Pages: 60

Brand: LaCie Pages: 2

Little Big Disk Quadra

Brand: LaCie Pages: 4

Little Big Disk Quadra

Brand: LaCie Pages: 24

Brand: LaCie Pages: 53

Brand: LaCie Pages: 59

5BIG THUNDERBOLT 2

Brand: LaCie Pages: 54

Starck Desktop Hard Drive

Brand: LaCie Pages: 2

Brand: LaCie Pages: 24

Brand: LaCie Pages: 52

Rugged Hard Disk

Brand: LaCie Pages: 2

Network Space MAX

Brand: LaCie Pages: 2

Rugged Hard Disk

Brand: LaCie Pages: 2

Brand: LaCie Pages: 37

Brand: LaCie Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands