Seagate Cheetah ST3146356SS, Product Manual

Page: 56 / 82

52 Cheetah 15K.6 SAS Product Manual, Rev. C
10.3.1 Inquiry data
Table 22 lists the Inquiry command data that the drive should return to the initiator per the format given in the
SAS Interface Manual .
Table 22: Inquiry data
Bytes Data (hex)
0-15 00 00 xx** 12 8B 00 10 0A 53 45 41 47 41 54 45 20 Vendor ID
16-31 [53 54 33 34 35 30 38 35 36 53 53]
1
20 20 20 20 20 Product ID
32-47 R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
48-63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
64-79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80-95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
96-111 00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 32* *Copyright
112-127 30* 30* 37* 20 53 65 61 67 61 74 65 20 41 6C 6C 20 notice
128-143 72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20
* Copyright year (changes with actual year).
**
SCSI Revision support. Refer to the appropiate SPC release documentation for definitions.
PP 10 = Inquiry data for an Inquiry command received on Port A.
30 = Inquiry data for an Inquiry command received on Port B.
R# Four ASCII digits representing the last four digits of the product firmware release number.
S# Eight ASCII digits representing the eight digits of the product serial number.
[ ] Bytes 18 through 26 reflect model of drive. The table above shows the hex values for Model ST3450856SS.
Refer to the values below for the values of bytes 18 through 27 of you particular model:
ST3450856SS 53 54 33 34 35 30 38 35 36 53 53
ST3450056SS (FDE) 53 54 33 34 35 30 30 35 36 53 53
ST3300656SS 53 54 33 33 30 30 36 35 36 53 53
ST3300056SS (FDE) 53 54 33 33 30 30 30 35 36 53 53
ST3146356SS 53 54 33 31 34 36 33 35 56 53 53
ST3146756SS (FDE) 53 54 33 31 34 36 37 35 56 53 53