Seagate Cheetah ST173404FC, Product Manual

Page: 60 / 80

50 Cheetah 73FC Product Manual, Rev. C
9.5 FC-AL physical interface
Figure 12 shows the location of the J1 Fibre Channel single connection attachment (FC-SCA) and the J6 con-
nector. Figure 14 provides the dimensions of the FC-SCA. Figure 15 provides the dimensions of the J6 con-
nector.
Details of the physical, electrical, and logical characteristics are provided within this section. The operational
aspects of Seagate’s Fibre Channel drives are provided in the Fibre Channel Interface Manual..
Figure 12. Physical interface
9.5.1 Physical characteristics
This section defines physical interface connector.
9.5.1.1 Physical description
FIbre Channel drives may be connected in a loop together or with other compatible FC-AL devices. A maxi-
mum of 127 devices may have addresses; however, one of the addresses is reserved for a fabric port switch
device. This means 126 addresses are available for FC-AL devices. More FC-AL compatible devices may phys-
ically reside on the loop, but they will not be functional because they would not be able to obtain valid
addresses.
Port bypass circuits (PBCs) allow devices to be inserted into unpopulated locations or removed from the loop
with loop operation recovery after a brief interruption. These PBCs are located external to the FC-AL device.
Figure 13 shows the relationship between the PBC and FC-AL device.
Figure 13. Port bypass circuit physical interconnect
J6
Port Bypass
Circuit N–1
Select
Drive N–1
Port Bypass
Circuit N+1
Drive N+1
Drive N
Serial
In Serial
Out
From Previous
Drive
Port Bypass
Circuit
To Next
Drive
MUX