Seagate Cheetah 15K.5 SAS Series Page 81 Product Manual Download | Manualshive

Page: 81 / 90

background image

Cheetah 15K.5 SAS Product Manual, Rev. C

73

10.0

Seagate Technology support services

Online services

Internet

www.seagate.com for information about Seagate products and services. Worldwide support is available 24
hours daily by e-mail for your questions.

Presales Support: www.seagate.com/support/email/email_presales.html or [email protected]

Technical Support: www.seagate.com/support/email/email_disc_support.html or [email protected]

mySeagate

my.seagate.com is the industry’s first Web portal designed specifically for OEMs and distributors. It provides
self-service access to critical applications, personalized content and the tools that allow our partners to man-
age their Seagate account functions. Submit pricing requests, orders and returns through a single, password-
protected Web interface—anytime, anywhere in the world.

spp.seagate.com

spp.seagate.com supports Seagate resellers with product information, program benefits and sales tools. You
may register for customized communications that are not available on the web. These communications contain
product launch, EOL, pricing, promotions and other channel-related information. To learn more about the ben-
efits or to register, go to spp.seagate.com, any time, from anywhere in the world.

Seagate Service Centers

Presales Support

Our Presales Support staff can help you determine which Seagate products are best suited for your specific
application or computer system, as well as product availability and compatibility.

Technical Support

Seagate technical support is available to assist you online at support.seagate.com or through one of our call
centers. Have your system configuration information and your “ST” model number available.

SeaTDD™ (+1-405-324-3655) is a telecommunications device for the deaf (TDD). You can send questions or
comments 24 hours daily and exchange messages with a technical support specialist during normal business
hours for the call center in your region.

Customer Service Operations

Warranty Service

Seagate offers worldwide customer support for Seagate drives. Seagate distributors, OEMs and other direct
customers should contact their Seagate Customer Service Operations (CSO) representative for warranty-
related issues. Resellers or end users of drive products should contact their place of purchase or one of the
Seagate CSO warranty centers for assistance. Have your drive’s “ST” model number and serial number avail-
able.

«
...
79
80
81
82
83
...
»

Summary of Contents for Cheetah 15K.5 SAS Series



























































































Reviews:

No comments

Related manuals for Cheetah 15K.5 SAS Series

Brand: Kaleidescape Pages: 24

Rugged Triple USB 3.0

Brand: LaCie Pages: 2

Rugged Triple USB 3.0

Brand: LaCie Pages: 2

Brand: LaCie Pages: 5

RUGGED BOSS SSD

Brand: LaCie Pages: 60

Brand: LaCie Pages: 2

Little Big Disk Quadra

Brand: LaCie Pages: 4

Little Big Disk Quadra

Brand: LaCie Pages: 24

Brand: LaCie Pages: 53

Brand: LaCie Pages: 59

5BIG THUNDERBOLT 2

Brand: LaCie Pages: 54

Starck Desktop Hard Drive

Brand: LaCie Pages: 2

Brand: LaCie Pages: 24

Brand: LaCie Pages: 52

Rugged Hard Disk

Brand: LaCie Pages: 2

Network Space MAX

Brand: LaCie Pages: 2

Rugged Hard Disk

Brand: LaCie Pages: 2

Brand: LaCie Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands