Seagate Barracuda 36ES ST318417N, Product Manual

Page: 58 / 106

48 Barracuda 36ES Product Manual, Rev. H
Notes.
[1] Extended messages (see the
SCSI Interface Product Manual,
part number 75789509).
[2] Supports all options except qas_req and iu_req.
9.3 SCSI interface commands supported
Table 5 following lists the SCSI interface commands that are supported by the drive. Barracuda 36ES Family
drives can be changed back and forth between SCSI-1, SCSI-2, and SCSI-3 (Ultra160) modes using the
Change Definition Command. OEM standard drives are shipped set to operate in Ultra160 mode.
Table 5: Commands supported by Barracuda 36ES family drives
Command name
Command
code Supported by
SCSI-2/3
Change definition 40h N
Compare 39h N
Copy 18h N
Copy and verify 3Ah N
Format unit [1] 04h Y
Block Format N
Bytes from index Y
Physical sector format Y
DPRY bit supported N
DCRT bit supported Y
STPF bit supported Y
IP bit supported Y
DSP bit supported Y
IMMED bit supported Y
VS (vendor specific) N
Inquiry (see Table 7 for Inquiry data) 12h Y
Date code page (C1h) Y
Device Behavior page (C3h) Y
Firmware numbers page (C0h) Y
Implemented operating def page (81h) Y
Jumper settings page (C2h) Y
Supported Vital product data page (00h) Y
Unit serial number page (80h) Y
Lock-unlock cache 36h N
Log select 4Ch Y
DU bit N
DS bit Y
TSD bit Y
ETC bit N
TMC bit N
LP bit N
Log sense 4Dh Y
Cache statistics page (37h) Y
Non-medium error page (06h) Y
Pages supported list (00h) Y
Power-on time page (3Eh) Y
Read error counter page (03h) Y
Drive self-test page (10h) Y
S.M.A.R.T. attribute log page (30h) Y
Verify error counter page (05h) Y