Getting Started
• Do not use alcohol or mind-altering drugs prior to using
this product.
• ALWAYS keep the SEA-DOO
®
SEASCOOTER
™
out of
direct sunlight when not in use. HEAT KILLS BATTERIES.
• When using the SEA-DOO
®
SEASCOOTER
™
for SCUBA,
ascents and descents should be made in accordance with
recognized diving practices.
• The SEA-DOO
®
SEASCOOTER
™
should only be used for
SCUBA by qualified divers.
• Always follow this age recommendation: a child under 16
years old should never operate this SEA-DOO
®
SEASCOOTER
™
.
• Never open the Cover of the SEA-DOO
®
SEASCOOTER
™
in the water.
• When not in use, always turn the Master Switch to the off
position.
• Do not use the SEASCOOTER
™
below the recommended
maximum depth of 20m/65ft.
• ALWAYS remove the battery from the unit when not in use.
• DO NOT store the battery in the unit
When you buy the SEA-DOO
®
SEASCOOTER
™
the battery
is disconnected and needs to be charged. Follow the safety
cautions on pages 9 to 12 and charging instructions on
pages 13 to 16.
Using the SEASCOOTER
™
for swimming and snorkeling.
When swimming or snorkelling the SEA-DOO
®
SEASCOOTER
™
should be kept positively buoyant - this is
done by simply making sure the Buoyancy Chamber is
empty and fitted inside the Nose Cone.
To use the SEASCOOTER
™
for swimming or snorkeling
follow these instructions.
1. Charge the battery and install just before use.
2. Make sure that Vent Plug is closed.
3. Place the SEA-DOO
®
SEASCOOTER
™
into the water so
the Handle, Outer Nose Cone and Nozzle fill with water.
4. When ready to set off, switch the Master Switch to the On
position shown in figure 2.
5. Pull and hold both Triggers to start the Propeller.
(There is a short delay before the Propeller begins to
rotate).
6. To stop the Propeller, simply release the Trigger.
7. Always turn the Master Switch off when out of the water.
4
5
