FINAL PREPARATION
4–TEC SC Models
1
F18E0N6
With vehicle on a level surface, liquid should
be between MIN. and MAX. level marks [[[[1]]]] of
coolant reservoir when engine is cold.
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
The watercraft is level when it is in water.
When on a trailer, raise trailer tongue and block in
this position when bumper rail is level.
Add coolant to have the level between marks as
required.
Use a funnel to avoid spillage.
Do not overfill.
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
Use a blend of 50% antifreeze with 50%
water. Premixed antifreeze/water is available
(P/N 293 600 038).
Properly reinstall and tighten filler cap then
reinstall seat extension.
Watercraft Identification
To enter the watercraft identification or to program
a safety lanyard, use Bombardier Utility and
Diagnostic Software (B.U.D.S.) in conjunction
with the VCK.
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
Make sure to use B.U.D.S. version
G2.0.0
or higher and take note of the following details:
- Version G2.0.1 of B.U.D.S. is now available
on BOSSWeb
- Version G2.0.1 of B.U.D.S. is
not
available on CD
- Installing version G2.0.1 of B.U.D.S. will
not
require a new access code as version G2.0.0 did
if it is put in the same directory as G2.0.0 was
- Version G2.0.0 of B.U.D.S. will still work fine for
programming this Sea-Doo model
F18R0D6
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
There are a few upgrades on Version
G2.0.1, including a function that automatically saves
each MPEM document when read from a vehicle.
The document will be saved in the same directory
as the B.U.D.S. program was saved in. See photo.
8 / 15
2004-1
Predelivery
