9
Troubleshooting
What to do if …
… the LED does not light.
The light may be turned off by over-heating protection. Turn off power to allow the light to cool
down. The light will resume normal operation after 30 to 60 minutes typically.
Examine the LED light assembly.
Check if the flush mount wireless remote
’s power connection is in good.
Check if the wireless remote
’s battery is in good condition (405683-1, sold separately).
… the spot light does not respond to remote control.
Press and hold button for 2 seconds.
Move to a location that is less than 15 m away.
Move to a location that has no obstructing structure between remote control and spot light.
Make sure the light is not mounted on any metal surface and there is sufficient clearance below.
Replace battery for remote control.
Check whether the last digits of serial numbers inside light housing and inside remote control are
identical.
… the spot light does not respond to any control.
Check voltage of inboard battery.
Check the fuse or circuit breaker that protects spot light and joystick control panel.
Carefully uninstall the spot light. Examine the electrical connections and wire harness.
Check if the flush mount wireless remote
’s power connection is in good.
Check if the wireless remote
’s battery is in good condition (405683-1, sold separately).
！
Do not replace a blown fuse until the cause of spot light malfunction is identified and resolved.
！
DO NOT replace a blown fuse with a fuse that takes higher current.
… the spot light halt during operation.
Return spot light and control to dealer for further inspection.
… the spot light cannot rotate in certain direction.
Carefully uninstall the spot light and examine the electrical connections and wire harness.
Replace control.
For other problems, and when problem is not solved with the above tips
…
Return complete product with proper packaging to dealer for inspection. Include a description of the
problem, user contact information, and proof of purchase if requesting warranty service.
Installation work and repairs to electrical components of this product
must
only
be carried out by a suitably
qualified and competent
person in accordance
with current
local and national safety regulations
. Repairs and other work by
unqualified persons could be dangerous. The manufacturer cannot be held
liable for unauthorized work.
