Seacraft ENC II Quick User Manual Download

Page: 60 / 70

Advanced

Please do not change this options from its default values, unless asked by our technical support.

Send Bluetooth Logs

Please do not use this option from its default values, unless asked by our technical support.

Send Today’s Log

Please do not use this option from its default values, unless asked by our technical support.

28.

ENC2 firmware update

To use this feature, you will have to get new firmware file. This file can be send to you from our support team via e-mail,

after receiving your device serial number. You will have to copy received file to the device (PC or mobile device) when

this auxiliary software is installed.
Before starting update process :

Make sure ENC2 is charged at least to 50%

Make sure your PC or mobile device is charged enough to work for 15 minutes or more

Go away from any strong electromagnetic field sources, which can disturb wireless connection (microwaves,

electric motors, etc.)

Start auxiliary software and select

Configuration



Upgrade

Select ROM file which you received from us.

DO NOT try

to use any other file in this option.

Make sure no other application on your PC or mobile device will disturb update process

Summary of Contents for ENC II







































































Search results

Summary of Contents for ENC II

Reviews:

Related manuals for ENC II

Brands by name

Popular brands

Seacraft ENC II, Quick User Manual

Search results

Summary of Contents for ENC II

Reviews:

Related manuals for ENC II

Brands by name

Popular brands