Making calls
Using handset
Lift handset from its cradle and await the continous dialtone to sound
Dial the number
Await the answering
Conduct the conversation
Terminate call by replacing handset
Using headset
Press the headset key and await the continous dialtone to sound
Dial the number
Await answering
Conduct the conversation
Terminate call by pressing the headset key or by pressing the
push-to-talk button of the headset 3 times fast.
NOTE that the station will NOT terminate automatically.
Receiving calls
Using handset
When a call comes in, lift handset from its cradle
Conduct the conversation
Terminate call by replacing handset
Using headset
Press the headset key or the push-to-talk button of the headset
Conduct the conversation
Terminate call by pressing the headset key or by pressing the push-to-talk
button of the headset 3 times fast.
NOTE that the station will NOT terminate automatically.
DOC110811CJ01_01
Conducting a call
Push-to –talk
When operating in a noisy environment, it can be conveniet to mute own
microphone when not speaking. This leads to better sound quality as noise
picked up by own microphone is not mixed into earpiece of handset
or earcups of headset. Push-to-talk mode for handset is controlled by the
push-to-talk key of the keyboard wereas push-to-talk mode for headset is
controlled by the push-to-talk button of the headset.
For both buttons, press the button when speaking, and release it when not
speaking. Returning to full duplex with the microphone staedy on is done by
giving the push-to-talk key a short push.
Push-to-talk mode is indicated by the green indicator flashing, and full
duplex is indicated by the green call activity indicator steady on.
Transfer
After starting a call using the handset, it is possible to turn the call into a
handset-
headset call by pressing the headset button and returning the handset into
headst
its cradle.
Transfer
After starting a call using the headset, it is possible to turn the call into a
headset-
handset call simply by lifting the handset from its cradle.
handset
Headset connector
A headset can be connected using a water tight connector set. The connector allows for removing
the headset when not in use. The connecrtor is
NOT
water tight when left open, so it is important
to mount the cover properly when the headset is removed, in order to leave it tight and closed
for mositure. Failure to do so will reduce lifetime.