manualshive.com logo in svg

Seac ACTION, Manual

Share
Download
Seac ACTION Manual Download Page 24

24

Alarms (ALARMS)

• 

WARNING!

Action allows you to suppress audible alarms. However, we recommend 

that you only make this choice after careful consideration and with 

full awareness. Audible alarms are an important warning for possible 

violations and behavior errors during the dive that could result in 

accidents, even serious ones.

All the audible alarms can be enabled (ON) or disabled (OFF) using the HR 

buttons or LR and confirmed using the LL button.
• 

WARNING!

Except for special situations, we do not recommend disabling audible alarms.

DECO VLT:

 decompression stop violation alarm signaled by the Action.

MOD VLT:

 alarm indicating violation of maximum operating depth permitted for 

the gas mix in use.

ASC SPD:

 excessive ascent speed alarm.

LAYOUT MENU: ALARMS

Display

BACKLIGHT BRIGHTNESS LEVEL (BKL LEV):

Levels available from 0 to 3 (if 

you select “0” backlighting will not activate)

BKL TIME:

 duration of the backlight in seconds in AUTO mode; selectable from 

2” to 60”.

BKL MODE:

 3 modes: 

AUTO

 by choosing this option, the backlight will remain on for the preset time.

MAN:

 the backlighting will be turned on/off manually using the HL button.

Summary of Contents for ACTION

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands