manualshive.com logo in svg

Seac ACTION, Manual

Share
Download
Seac ACTION Manual Download Page 15

ACTION

15

Permitted Altitude Indicator

The Permitted Altitude is calculated and updated after dives as follows:
The Permitted Altitude icon is shown in Watch mode, and is managed as follows:
-  Max 1000 m/3290 ft: 1 triangle on.
-  Max 2000 m/6580 ft: 2 triangles on.
-  Max 3000 m/9870 ft: 3 triangles on.
-  No Limit: icon off (not displayed).

Battery/Run-time

The computer is powered by a 3V CR2450 MAXCELL Asia Product battery with 

a nominal capacity of 600 mAh.
The battery capacity varies based on environmental conditions.
The battery run-time varies depending on how the product is used and which 

functions are used.
The run-time drops noticeably when backlighting, audible alarms, PC connections, 

and updates are used.
When the Software Application is launched, a test of the battery under load 

is performed. When this happens you may notice the backlighting turn on 

temporarily. If the battery voltage under load is less than 2.0V (Minimum 

Voltage), the device will remain off or locked, on a screen with the words “

LOW 

BAT

”. In some cases you may see a continuing Reset for a few cycles. 

If the battery voltage under load is below 1.8V (Start Voltage), the backlighting 

may remain on continuously until the computer battery is completely drained. In 

this case, the computer will not turn on at all and no text appears on the LCD.
The Battery icon on the display has 2 segments:
Segment 1: Battery Outline ==> Battery lower than Minimum Voltage (do not dive).
Segment 2: First Bar from the bottom ==> Battery lower than 2.1V (Low level. 

The voltage could plummet during a dive in especially cold water).
Theoretical run-time, linked strictly to the quality of the battery installed:

Summary of Contents for ACTION

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands