AUTOSTART SWING FAN SPEED
AUTOSTOP HOUR MIN
1) Press the ON/OFF Button to
turn the unit ON
2) Press the MODE Button
and select the desired mode
(AUTO, COOL, DRY, or HEAT)
FAN SPEED Button
4) Press the FAN SPEED
Button to select the desired
fan speed
Temperature adjusting procedure during AUTO SELECT operation
3) Press the VANE CONTROL
Button to select the desired
angle of the outer horizontal
louvers. The horizontal
louvers control the vertical
air flow from the unit.
There are 5 stationary angles.
5) Press the SWING
button to over-ride the VANE
CONTROL button. When
pressed, The SWING button
makes the horizontal louvers
swing continuously up
and down
By operating the VANE CONTROL
and SWING buttons, you may direct
the airflow to maximize the cooling
effectiveness
NOTE: in the cooling operation with the VANE CONTROL blowing down (4th & 5th positions),
the outer horizontal louvers will return to the level (position 1) after 1 hour in order to
prevent condensate water from dripping.
LOUVER ADJUSTMENTS (Air Flow Direction)
-8-
SLEEP
MODE
VANE CONTROL
