E-15
Taking Photographs
When you shoot with a compact digital camera, set the built-in
flash of the camera to the forced-flash mode. The strobe will
not fire unless the built-in flash of the camera fires.
1
2
Set the mode switch to [TTL]
Take a photograph
TTL Photography
Photography based on the camera's photometric data of the
subject's brightness, which is used to regulate the light amount
of the strobe so that the correct exposure is achieved.
Even if the distance from the subject has changed, the light
amount will be controlled automatically and you can easily
obtain the correct exposure. After shooting with TTL automatic
light control, the TTL lamp on the light level switch will illuminate
in green for approximately 3 seconds. When automatic light
control was not used, the TTL lamp will not illuminate.
TTL Photography
