Sea&Sea MDX-5D Mark III, Instruction Manual

Page: 9 / 28

Preparation for Setting Up
Prepare the housing and port
Prepare the digital camera
E-8
This product must be used in combination with the optional equipment
(digital camera, port, strobe, accessories etc.) for underwater photography.
In order to set up the equipment, prepare each item correctly.
This product is exclusively designed for use with Canon 5D Mark Ⅲ
digital camera. Other cameras are not compatible with this product.

Make sure that there is sufficient battery power remaining and the image
storage medium has enough room for the number of pictures.

Remove the eyecup from the camera.

Remove the strap or the LCD monitor cover from the camera, if any of
these accessories are attached.

If the lens has a focus mode switch, set it properly.

Make sure the camera is operating correctly, referring to the camera's
instruction manual for details.
Prepare the connecting accessories
When using external strobes, lights or other accessories in combination
with this product, prepare the equipment before setting up.

If the accessories are kept watertight by O-rings, make sure the O-rings
are properly maintained.

If the accessories are powered by batteries, make sure that there is sufficient
battery power remaining.

Make sure the equipment is operating correctly, referring to the instruction
manual provided with the equipment.
This product is kept watertight by the O-ring.
To keep the O-ring functioning properly,
please observe the following before setting up.

Make sure to remove the O-ring when maintaining.

For detailed O-ring maintenance methods,
please see the O-ring maintenance manual.
Maintaining the O-ring
CAUTION

Make sure to fit/install the O-ring into the groove properly after maintenance.
O-ring