Connect the strobe with the fiber-optic cable (option) when the strobe is
triggered by sensing the light from the camera's built-in flash.
CAUTION
1
Insert the fiber-optic cable's
connector into the socket until
it stops
Shooting Tips!
When shooting with an external flash, we recommend setting the ISO to
125.
When the 6G camera is turned Off, the shooing function settings will
return to their default settings. Use the camera`s mode memory function
to save the current set value.
Before inserting the fiber-optic cable, check to make sure that there are
no scraches or dirt on the connector surface. Scratches or dirt may
cause the strobe to malfunction.
To protect the surface from scratches or dirt, do not remove the caps from
the fiber-optic cable sockets when the cable is not inserted.
There is no possibility of water leaking from the fiber-optic cable socket
even if the fiber-optic cable/cable socket cap is removed underwater.
After the strobe is connected to the housing, make sure to check that the
connected strobe functions correctly before underwater use.
E-13
Connecting the Strobe
