SEA TAURUS CHAIN, Instruction Manual

Page: 2 / 16

I ORTANT SA ETY IN OR ATION
All the abo e described operations must be made e clusi el b an authori ed installer
Clean and grease parts in movement wheels,
counter-connecting rod, release, etc.
Check for corroded parts and replace if
necessary
Check if the screws and all mounting
hardwares are properly tighten
Annual
Annual
Annual
Check the conditions of wear and tear of the
devices in movement
Check the correct drain of the rainwater
Check the integrity of the connection cables
Annual
Annual
Annual
Inspect the track for any signs of cracking or
separation
Ensure that the gate moves freely
Annual
Annual
Check and confirm the proper operation of all
safety devices photocells, edge sensors etc
Check and confirm the operation of all
installed accessories
Check and confirm the operation of the
manual release
Annual
Annual
Annual
TURNING ON T E POWER
Check the battery conditions and be sure that
connections are free of corrosion
erify the functionally of the battery backup,
or power failure option
Y MAIN POWER SOURCE TURNED OF F
Annual
TURNING OFF T E POWER
C
C
C
C
GENERAL SAFETY PRECAUTIONS
The following precautions are an integral and essential part of the product and must be supplied to the user Read
them carefully as they contain important indications for the safe installation, use and maintenance.
. These instruction must be kept and forwarded to all possible future users of the system.
2. This product must be used only for that which it has been expressly designed.
3. Any other use is to be considered improper and therefore dangerous.
4. The manufacturer cannot be held responsible for possible damage caused by improper, erroneous or
unreasonable use.
5. Avoid operating in the proximity of the hinges or moving mechanical parts.
6. Do not enter the path of the moving gate while in motion.
7. Do not obstruct the motion of the gate as this may cause a situation of danger.
. Do not allow children to play or stay within the path of the moving gate.
. eep remote control or any other control devices out of the reach of children, in order to avoid possible involuntary
activation of the gate operator.
0. In case of break down or malfunctioning of the product, disconnect from the main power source.
Do not attempt to repair or intervene directly, contact only qualified personnel for repair.
. Failure to comply with the above may create a situation of danger.
2. All cleaning, maintenance or repair work must be carried out by qualified personnel.
3. In order to guarantee that the system works efficiently and correctly it is important to have the manufacturer s
instructions on maintenance of the gate and operator carried out by qualified personnel.
4. In particular, regular checks are recommended in order to verify that the safety devices are operating correctly.
All installation, maintenance and repair work must be documented and made available to the user.
IMPORTANT SAFETY INSTRUCTIONS
WARNIN To reduce the risk of in ury or death:
. READ AND FOLLOW ALL INSTRUCTIONS.
2. Never let children operate or play with gate controls. eep the remote control away from children.
3. Always keep people and objects away from the gate.
NO ONE SHOULD CROSS THE PATH OF THE MO IN ATE.
4.Test the gate operator monthly. The gate MUST reverse on contact with a rigid object or stop when an object
activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate operator. Failure to
adjust and retest the gate operator properly can increase the risk of injury or death.
5. Use the emergency release only when the gate is not moving
6.
EEP ATES PROPERL MAINTAINED. Read the owner’s manual. Have a qualified service person make
repairs to gate hardware.
7. The entrance is for vehicles only. Pedestrians must use separate entrance.
. Every gate operator installation MUST have secondary protection devices agains entrapments, such as edge
sensors and photo beams more in particulary in places where the risk of entrapments is more likely to occur
. SA E THESE INSTRUCTIONS
!
PERIODICAL MAINTENANCE
2