SEA TAURUS CHAIN, Instruction Manual

Page: 11 / 16

Fig. 32
Limit switch in closing
Limit switch in opening
Mechanical limit switch
Fig. 33
7. LIMIT SWITC AD USTMENT
For versions «TAURUS WITH LIMIT SWITCH»
7.1. To install and adjust the limit switches in opening
proceed as follows Fig. 32 :
- Completely open the gate
- Place the plate on the rack in order to have the lever
of the mechanical limit switch Fig. 33 in correspon-
dance of the limit sheet and fix it with the appropriate
screws Fig. 34 .
7.2. To install and adjust the limit switches in closing
the gate must be completely closed.
7.3. By setting the braking trimmer on control unit it is
possible to make the gate stop on the desired position
Fig. 34
8. GROUNDING (Fig. 35)
Fig. 35
9. ELECTRIC CONNECTIONS OF T E
INSTALLATION (Fig. 36)
1
2
3
4
10
5
6
7
8
9
1) Taurus
2) Photocell S
3) Photocell D
4) Mechanical safet edge
5) e push botton
Fig. 36
6) Flasher
7) Recei er
8) Warning notice
9) unction bo
10) Differential
!
CAUTIONS:
The gate must be mo ed in halfwa position
before starting the self-learning
• On versions «TAURUS WITHOUT LIMIT SWITCH»:
Check the micro-switch inside the slot is correctly
connected to the STOP output on control unit
11