SATURN-BOXER
MECHANICAL INSTALLATION
International registered trademark n. 2.777.971
10. CLUTCH ADJUSTMENT
(Where present)
10.1.
Switch off electric power.
10.2.
In order to adjust the clutch it is necessary to:
- Act on the scrub screw “A” (Fig. 30) as follows:
- Turning clockwise = less clutch sensibility / more thrust force
-Counter clockwise = more clutch sensibility / less thrust force
11. SCREW COVER MOUNTING
At the end of the mechanical installation and after having
executed all the required adjustments, mount the two screw
covers on the operator as shown in Fig. 31.
Fig. 31
Fig. 30
A
A
Ex. Boxer
+ power
- sensibility
- power
+ sensibility
12. ELECTRIC CONNECTIONS OF THE
INSTALLATION (Fig. 32)
1) Saturn - Boxer
2) Photocell Sx
3) Photocell Dx
4) Mechanical safety edge
5) Key push botton
6) Flasher
7) Receiver
8) Warning notice
9) Junction box
10) Differential
Fig. 32
1
2
3
4
10
5
6
7
8
9
2
The cable mesures are indicated in mm
13. RISK EXAMINATION
The points pointed by arrows in Fig. 33 are potentially dangerous. The
installer must take a thorough risk examination to prevent crushing,
conveying, cutting, grappling, trapping so as to guarantee a safe
installation for people, things and animals (
)
Re. Laws in force in the
country where the installation has been made.
14. NOTICE
SEA USA Inc. can not be deemed responsible for any damage or
accident caused by product breaking, being damages or
accidents due to a failure to comply with the instructions herein.
The guarantee will be void and the manufacturer responsibility
will be nullified if SEA USA Inc. original spare parts are not being
used.
Packaging materials such as
plastic bags, foam polystyrene, nails etc must be kept out of
children’s reach as dangers may arise.
The electrical installation shall be carried out by a
professional technician who will release documentation as
requested by the laws in force.
Fig. 33
15. PERIODIC MAINTENANCE
All the above described operations must be done exclusively by
an authorized installer.
Check the oil level (where present)
(Use the oil level rod)
Change oil
Check the release functionality
Check the clutch functionality
(where present)
Check the distance between pinion and gear
rack (0,059 in.)
Check the usury status of pinion and
gear rack
Check the fixing screws
Check the connection cables integrity
Check limit switch functionality and status in
opening and closing and the related
small plates
Annual
4 years
Annual
Annual
Annual
Annual
Annual
Annual
Annual
67411165
9
REV 02 - 12/2013
