Sistemi elettronici
di Aperture Porte e Cancelli
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
http://www.seateam.com
e-mail:[email protected] (Uff. Comm.le)
Do you want to write on the internal memory ?
1. Switch on the terminal with the red pushbutton or return to the main menu
2. Press pushbutton A
3. Press pushbutton C twice
4. Press ENT
Do you want to reset the memory of all installations ?
1. Switch on the terminal pressing the red pushbutton or return to the main menu
2. Press pushbutton A
3. Press pushbutton C
4. Press pushbutton D
5. Press ENT
6. Press ENT
It is possible to execute also the function GATE ADMINISTRATION on the following
electronic control units: SWING2, GATE1 starting from rev.34 and GATE2 starting from
rev.33
Do you want to see the adjustments of your automation ?
1. Extract the memory EEPROM from your electronic unit and insert it into the special
space on the terminal.
2. Switch on the terminal with the red pushbutton or return to the main menu
3. Press pushbutton A
4. Press pushbutton D
5. Slide over the list of the set parameters with the pushbuttons A up and B down
A
A
B
I
/
O
I
/
O
A
C
ENT
I
/
O
I
/
O
A
C
D
ENT
I
/
O
I
/
O
A
D
A
B
Do you want to read in the internal memory all the memorized installations (max 14
installations) ?
1. Switch on the terminal pressing the red pushbutton or return to the main menu
2. Press pushbutton A
3. Press pushbutton C
4. Press pushbutton A
5. Slide over the list with A up with B down
I
/
O
I
/
O
A
C
Do you want to see the adjustments of your automation and modify them?
1. Repeat the preceding steps up to point 5
2. Select the parameter which has to be modified
3. Press ENT
4. Press A to increase the value B to reduce it
5. Press ENT
6. Press ESC
7.
Press ENT to save the modifications, ESC to leave the parameters unchanged.
ENT
A
B
ENT
ESC
ENT
ESC
English
Rev. 04 - 09/2007
I
/
O
I
/
O
10
