background image

Sistemi elettronici
di Aperture Porte e Cancelli

SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344

http://www.seateam.com
e-mail:[email protected]  (Uff. Comm.le)
          

OTHER FUNCTIONS

A: Installer code
B: Reception frequency choice
C: Change language terminal menu 
D: Switch off time (safe battery)

A: Instal. Code

B: Radio choice

C: ChangeLanguage

D: Switch off time.

B

A: 

Installer Code

Allows to insert an   installer code (password) so that to permit the future administration of 
that installation only to the installer who has configured the installation. Once inserted this 
code into the memory of the receiver, it is possible to memorize only radio transmitters 
which have been programmed with the corresponding installer code. 

C: 

Change Language of the terminal menu 

Allows to choose the language : Italian, English, French, German, Spanish ….etc…..

B: 

Choice reception frequency 

It is possible to choose the reception frequency of the terminal according to the radio 
transmitter to be read: 

C

 for 433MHz radio transmitters;

D

 for 868 Mhz radio transmitters.

D: 

Switch off time (safe battery function) 

When the terminal is not used it is possible to choose the automatic switch off time among 
the following values 1, 2, 5, 15 minutes.     

English

Rev. 04 - 09/2007

4

Summary of Contents for PalmCopy











Reviews: