background image

Sistemi Elettronici

di Apertura Porte e Cancelli

International registered trademark n. 804888

®

EFFICACY OF THE FOLLOWING TERMS OF SALE:

 the following general terms of sale shall be applied to all orders sent to SEA 

S.p.A. All sales made by SEA to all costumers are made under the prescription of this terms of sales which are integral part of sale 
contract and cancel and substitute all apposed clauses or specific negotiations present in order document received from the buyer.

GENERAL NOTICE 

The systems must be assembled exclusively with SEA components, unless specific agreements apply. Non-

compliance with the applicable safety standards (European Standards EM12453 – EM 12445) and with good installation practice 
releases SEA from any responsibilities. SEA shall not be held responsible for any failure to execute a correct and safe installation under 
the above mentioned standards.

1) PROPOSED ORDER

 The proposed order shall be accepted only prior SEA approval of it. By signing the proposed order, the Buyer 

shall be bound to enter a purchase agreement, according to the specifications stated in the proposed order.
On the other hand, failure to notify the Buyer of said approval must not be construed as automatic acceptance on the part of SEA.

2) PERIOD OF THE OFFER

 The offer proposed by SEA or by its branch sales department shall be valid for 30 solar days, unless 

otherwise notified.

3) PRICING

 The prices in the proposed order are quoted from the Price List which is valid on the date the order was issued. The 

discounts granted by the branch sales department of SEA shall apply only prior to acceptance on the part of SEA. The prices are for 
merchandise delivered ex-works from the SEA establishment in Teramo, not including VAT and special packaging. SEA reserves the 
right to change at any time this price list, providing timely notice to the sales network. The special sales conditions with extra discount 
on quantity basis (Qx, Qx1, Qx2, Qx3 formula) is reserved to official distributors under SEA management written agreement.

4) PAYMENTS

 The accepted forms of payment are each time notified or approved by SEA. The interest rate on delay in payment shall 

be 1.5% every month but anyway shall not be higher than the max. interest rate legally permitted.

5) DELIVERY

 Delivery shall take place, approximately and not peremptorily, within 30 working days from the date of receipt of the 

order, unless otherwise notified. Transport of the goods sold shall be at Buyer’s cost and risk. SEA shall not bear the costs of delivery 
giving the goods to the carrier, as chosen either by SEA or by the Buyer. Any loss and/or damage of the goods during transport, are at 
Buyer’s cost.

6) COMPLAINTS

 Any complaints and/or claims shall be sent to SEA within 8 solar days from receipt of the goods, proved by adequate 

supporting documents as to their truthfulness.

7) SUPPLY 

The concerning order will be accepted by SEA without any engagement and subordinately to the possibility to get it’s 

supplies of raw material which is necessary for the production; Eventual completely or partially unsuccessful executions cannot be 
reason for complains or reservations for damage. SEA supply is strictly limited to the goods of its manufacturing, not including 
assembly, installation and testing. SEA, therefore, disclaims any responsibility for damage deriving, also to third parties, from non-
compliance of safety standards and good practice during installation and use of the purchased products.

8) WARRANTY 

The standard warranty period is 12 months. This warranty time can be extended by means of expedition of the 

warranty coupon as follows:

SILVER:

 The mechanical components of the operators belonging to this line are guaranteed for 24 months from the date of 

manufacturing written on the operator.

GOLD:

 The mechanical components of the operators belonging to this line are guaranteed for 36 months from the date of 

manufacturing written on the operator.

PLATINUM:

 The mechanical components of the operators belonging to this line are guaranteed for 36 months from the date of 

manufacturing written on the operator. The base warranty (36 months) will be extended for further 24 months (up to a total of 60 
months) when it is acquired the certificate of warranty which will be filled in and sent to SEA S.p.A. The electronic devices and the 
systems of command are guaranteed for 24 months from the date of manufacturing. In case of defective product, SEA undertakes to 
replace free of charge or to repair the goods provided that they are returned to SEA repair centre. The definition of warranty status is by 
unquestionable assessment of SEA. The replaced parts shall remain propriety of SEA. Binding upon the parties, the material held in 
warranty by the Buyer, must be sent back to SEA repair centre with fees prepaid, and shall be dispatched by SEA with carriage forward. 
The warranty shall not cover any required labour activities.
The recognized defects, whatever their nature, shall not produce any responsibility and/or damage claim on the part of the Buyer 
against SEA. The guarantee is in no case recognized if changes are made to the goods, or in the case of improper use, or in the case of 
tampering or improper assembly. Furthermore, the warranty shall not apply if SEA products are partly or completely coupled with non-
original mechanical and/or electronic components, and in particular, without a specific relevant authorization, and if the Buyer is not 
making regular payments. The warranty shall not cover damage caused by transport, expendable material, faults due to non-
conformity with performance specifications of the products shown in the price list. No indemnification is granted during repairing and/or 
replacing of the goods in warranty. SEA disclaims any responsibility for damage to objects and persons deriving from non-compliance 
with safety standards, installation instructions or use of sold goods.

9) RESERVED DOMAIN 

A clause of reserved domain applies to the sold goods; SEA shall decide autonomously whether to make use 

of it or not, whereby the Buyer purchases propriety of the goods only after full payment of the latter.

10) COMPETENT COURT OF LAW

 In case of disputes arising from the application of the agreement, the competent court of law is the 

tribunal of Teramo. SEA reserves the faculty to make technical changes to improve its own products, which are not in this price list at 
any moment and without notice. SEA declines any responsibility due to possible mistakes contained inside the present price list 
caused by printing and/or copying. The present price list cancels and substitutes the previous ones. The Buyer, according to the law 
No. 196/2003 (privacy code) consents to put his personal data, deriving from the present contract, in SEA archives and electronic files, 
and he also gives his consent to their treatment for commercial and administrative purposes. Industrial ownership rights: once the 
Buyer has recognized that SEA has the exclusive legal ownership of the registered SEA brand, he will commit himself to use it in a way 
which does not reduce the value of these rights, he won’t also remove, replace or modify brands or any other particularity from the 
products. Any kind of replication or use of SEA brand is forbidden as well as of any particularity on the products, unless preventive and 
expressed authorization by SEA.

In accomplishment with art. 1341 of the Italian Civil Law it will be approved expressively clauses under numbers:
4) PAYMENTS - 8) GUARANTEE - 10) COMPETENT COURT OF LOW

TERMS OF SALES

Cod. 67410014

45

REV 03 - 11/2013

Summary of Contents for LEPUS 2000 TRIFASE

















Reviews: