manualshive.com logo in svg

SEA CORONA 110, Fitting And Connection Instructions, Page: 5 / 9

Share
Download
SEA CORONA 110 Fitting And Connection Instructions Download Page 5

Sistemi Elettronici

di Apertura Porte e Cancelli

International registered trademark n. 804888

®

Fig. 15

CORONA S/RP

Operator

5~10 cm

Fig. 16

Fig. 17

67410622

Rev 00 - 02/2012

Operator

Guide track

Bend link lever

Base for pulling

Guide track bracket

Link lever

Accessories

Transmitter

MAIN PARTS OF THE AUTOMATION CORONA RP

Guide track

Power supply

ENGLISH

15

On request one 4m piece guide

Release 

knob

Fixing bracket

U-shaped bracket

To adjust the door closing as precise as possible, release the bolts on the curved rod and adjust the run on the two holes (Fig. 15)

CONNECTION OF THE OPERATOR CORONA RP WITH THE GUIDE TRACK 

Before installing the operator   remove all unnecessary ropes or chain and disable any equipment, such as locks, not needed for 
powdered operation.

Before installing the operator, check that the door is in good mechanical condition correctly balanced and opens and closes 
properly.

U-shaped bracket 1

U-shaped bracket 2

Fixing bracket

Sliding block
(Sleigh)

Summary of Contents for CORONA 110










Reviews:

No comments