Fig. 12
Fig. 13
ALPHA 200 STANDARD
ALPHA 330 STANDARD
½ min. turn
Fig. 14
2.3.
Attach the operator on the previously installed back-bracket and fix it with the provided pivot (Fig 11)
2.4.
Release the arm (see paragraph 3)
2.5.
WARNING
: Turn the shaft up to its max. extension, afterwards turn it about at least half turn into the opposit direction (screw it) see
Fig. 12 and 13.
Note:
After installation, in opening, leave minimum 15 mm of working stroke, to avoid that the operator goes into mechanical lock (if
necessary install the stops on the ground or the optional special mechanical stops for Alpha).
2.6.
Attach the front bracket to the
extremity of the shaft (Fig 14)
2.7.
Close the gate
Fig. 11
ENGLISH
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
REV 06 - 07/2010
67410590
15
